AVRprog - Free download and software reviews - CNET Download

Hi Avinash I am trying to flash Atmega328P-PU for a project I have an AVRASP and I have downloaded as recommended by a friend your Extreme Burner but the version I have does not support the Atmega 328P where can I download the version that supports this chip without having to have a facebook account which I do not have or update the version I have.Best regards, Ian.

avrprog v.1.4 download

Hi Kunal,If the Mega8 is not fried, one relatively easy way to recover it is to build a Dontronics DT006 parallel port SPI programmer (very easy to build, even in a protoboard, with just a couple or 330 Ohms resistors and a cap). As you have messed up with the fuses, it is very important that you use an external clock source tied to XTAL1 pin. The frequency is not critical, one to two MHz will do fine (I use 2MHz). You can nake one with a 555 timer. For the download software, you can use avrdude ou get the CodeVisionAVR (the free eval version) from Setup as the programmer DT006. Setup carefully the fuse bits to fit your needs.Hope I have helped, and good luckAilson

please correct me if i m wrong1 download the firmware and other files2 then program the atmega8 with the firmware3 install all hardware(pcb)4 then program other avr uC using that programmer using ur software of extreme burner

neo-server@neo-server-desktop:/Downloads/xAVR$ ./avrprogFatal Error: Mismatch between the program and library build versions detected.The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6),and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6).Aborted

Do you consider compiling a 64bit Linux version? I am getting the./avrprog: error while loading shared libraries: libwx_gtk2u_richtext-2.8.so.0: cannot open shared object file: No such file or directory

hello avinash,i loved your software from the day i saw it getting famous,it has helped me a lot in learnin a lot by practicaly burning the code on to chip.but now as i installed windows 64 bit. and did not get drivers for the usbasp. i removed it and am running kubuntu,as i am new to linux i am not getting what your explaination foe linux installation is,i did download, then extract the file.opened terminal, but am stuck at this point. can you please please please tell me what to do further?i have installed libusp and wxGTKbut am stuck with the terminal part.PLEASE help me

I work with Debian and I did following:1. Downloaded libwxgtk2.8-0_2.8.10.1-3.1_i386.deb and libwxbase2.8-0_2.8.10.1-3.1_i386.deb2. sudo dpkg -X /mnt/sda5/downloads/libwxgtk2.8-0_2.8.10.1-3.1_i386.deb /emul/ia32-linux3. sudo dpkg -X /mnt/sda5/downloads/libwxbase2.8-0_2.8.10.1-3.1_i386.deb /emul/ia32-linux4. export LD_LIBRARY_PATH=/emul/ia32-linux/usr/lib:/usr/lib5. ./avrprog

Hi all,I have been using this excellent programming software for almost a year, with Atmega168 on prototyping board and hardware programmer from Protostak.com. This combination works flawlessly and I have written many AVR assembler programs and downloaded them with exterme burner software. All works beautifully.I wish to upgrade to Atmega128 stamp from Futurlec.com.Are there any known issues with Extreme burner and the 128 chip? Do I need to change any parameters?Thanks in anticipation of reply.Bob VK2ZRM, Sydney Australia

Hi, i am very much interested in your program , trying to leave MS-Windows aside , but when i run it under Linux-Mint , i have an error message:./avrprog: error while loading shared libraries: libusb-0.1.so.4: cannot open shared object file: No such file or directorymissing library, isnt it?need help ,Thank you

The AVR Butterfly (ATAVRBFLY) made by ATMELcomeswith a preloaded application. The application source-code can bedownloaded from the ATMEL Web-Site (AVR Butterfly -Application Rev07). It is written for the IAR EWAAVR 4.20aC-Compiler.This is a port of this code to avr-gcc using the avr-libc. Links toavr-gcc, avr-libc and theWindows-Distribution of the toolset (WINAVR) can be found here.

I didn't like that the installation process of Atmel Studio takes long. The program requires many additional components that are downloaded and installed separately.In my opinion, Atmel Studio has all it takes to help its users create and debug microcontroller applications.

The programmer should work with all AVRs that can be programmed with the AVR ISP (in-system programming) interface, which is also known as in-circuit serial programming (ICSP), serial programming, or serial downloading, but it has not been tested with all devices. We expect it to work with most AVRs in the megaAVR (ATmega) family. It does not work with the megaAVR 0-series of AVRs (e.g. the ATmega4809). This programmer works with some members of the tinyAVR (ATtiny) family, but it does not support the Tiny Programming Interface (TPI), and it does not support the Unified Program and DebugInterface (UPDI). It does not work with the XMEGA family or with 32-bit AVRs. The programmer features upgradable firmware, allowing updates for future devices.

This section explains how to connect the programmer to an AVR microcontroller using its in-system programming (ISP) interface, which is also known as in-circuit serial programming (ICSP), serial programming, or serial downloading.